"Inaccessible Boot Device" on Windows 11? Recover Files Before Reinstalling
Our founder and lead technician, Joseph Montanti, handles cases personally.
INACCESSIBLE_BOOT_DEVICE on Windows 11 means Windows lost access to its system partition during startup. A storage-driver problem, a changed controller setting, file-system corruption or failing hardware can cause it. Recover your files before reinstalling Windows, and locate the BitLocker recovery key if the drive is encrypted.
On this page
Why Windows cannot reach the boot drive
Keep damaged drives off. Power down a drive that disappears, overheats or gives repeated read errors. Leave any dropped or wet drive off, and shut down a hard drive that clicks, beeps or grinds.
Never run CHKDSK or Startup Repair on a failing drive. On stable hardware, save a separate copy or image before a reset, reinstall, format or boot repair, including a reinstall by a repair shop. If BitLocker is on, unlock the volume with an authorized credential before any file-system repair.
If you can still sign in and your drive reads normally, use this Windows session to save your files to external storage before you restart or change drivers. End the transfer if the disk vanishes or reads begin to fail.
The computer can reach the Windows startup screen and still fail when Windows tries to use its storage drivers to access the system volume. That produces stop code 0x0000007B, sometimes followed by a restart loop or Automatic Repair. Microsoft's definition of the error concerns access during startup, so the next step is to find where that access broke.
A driver or BIOS change is a useful clue. If the storage controller was changed from the mode Windows was installed with, Windows may no longer have the driver configuration it needs. Damaged storage drivers or an update that did not finish committing can also interrupt startup. Microsoft lists these alongside file-system corruption and faulty hardware in its 0x7B troubleshooting guide.
The blue screen can also appear when an SSD becomes unavailable. Its controller has to translate requests into reads from flash memory; a fault anywhere in that path can interrupt access. Seeing the model in BIOS shows that the computer can identify the device at that moment. Reading the files is a separate test.
| What you see | Likely area to investigate | What to do next |
|---|---|---|
| Error began after a storage-mode or driver change | Controller configuration or storage driver | Preserve the files, then check the previous configuration against the computer maker's instructions |
| Error began during an update | Update state, drivers or system files | Copy readable data before using Windows recovery options |
| BitLocker asks for a recovery key | The encrypted drive needs another unlock method | Find the matching 48-digit key |
| The SSD disappears intermittently from BIOS or UEFI, returns read errors or reports the wrong capacity | Drive, connection or controller trouble | Use hardware recovery rather than repeated startup attempts |
| The drive reads steadily from another system | The files can be copied independently of the broken Windows installation | Save them to separate storage and open the copies |
BitLocker and inaccessible boot device are separate problems
BitLocker protects the contents of the drive with encryption. Hardware, firmware or startup changes can trigger a recovery-key prompt because the normal unlock conditions have changed. Microsoft's BitLocker overview explains that device encryption can be enabled automatically on supported systems, with the recovery key saved to the associated account.
The recovery prompt asks for authorization to decrypt the drive. If you enter the correct key and then get INACCESSIBLE_BOOT_DEVICE, the storage or Windows startup problem still needs attention. Repeatedly entering the same key will not repair a storage driver.
Use Microsoft's recovery-key instructions from another phone or computer:
- Find the key ID shown on the affected computer's recovery screen. The ID helps select the matching key; it is different from the 48-digit unlock number.
- Sign in to your Microsoft account's recovery-key page using the account associated with this PC.
- For a work or school PC, check the organization's account or ask its IT administrator. Also check any saved recovery-key text file, USB copy or printout.
- Use the matching recovery key to unlock the volume. Keep that key available if the drive is moved to another computer for copying.
A Windows sign-in PIN is not a substitute for this recovery key when the drive is attached elsewhere. If you cannot locate the saved key, preserve the original PC and its configuration while checking the available unlock methods. BitLocker recovery depends on a valid protector or recovery credential; moving or repairing the SSD does not remove its encryption.
For a readable BitLocker drive attached to another Windows PC, an administrator can also use Microsoft's command-line tools:
- Run
manage-bde -statusto see the volumes and their lock status. Identify the attached Windows volume by its current drive letter. - Use
manage-bde -unlock D: -RecoveryPassword YOUR-48-DIGIT-KEY, replacing both the example drive letter and key placeholder. After unlocking, copy the wanted files from that volume to separate storage.
Copy files using a Linux live USB
A live USB can reach healthy non-removable storage when the computer can boot the USB and Linux supports its storage controller.
For an unencrypted NTFS Windows partition, Ubuntu provides a way to mount the source read-only and copy its files. Clicking a partition in a file manager does not establish read-only access, so the steps below select that mode explicitly. A BitLocker volume needs to be unlocked first; an ordinary NTFS mount command does not perform that step.
- On a working computer, follow Ubuntu's live-USB guide to write its installer image to a spare USB stick. Creating the stick erases that USB device. Use the affected PC's boot menu to select it, then choose Try Ubuntu.
- Connect a separate destination drive with enough room for the files. Before opening the internal volume, run
lsblk -o NAME,SIZE,FSTYPE,LABEL,MOUNTPOINTSin Terminal. Identify the Windows NTFS partition by its size and layout; device names vary between PCs. - If the source is already mounted, unmount it before proceeding. For example,
sudo umount /dev/nvme0n1p3applies only if that is your identified Windows partition. - Create a mount folder in the live session with
sudo mkdir -p /mnt/windows. Then mount the correct source partition withsudo ntfs-3g -o ro,norecover /dev/nvme0n1p3 /mnt/windows, replacing the example device name. This needs the NTFS-3G driver. - In Files, open
/mnt/windows/Users, then the appropriate user folder. Copy Documents, Desktop, Pictures, Downloads and other wanted folders to the destination drive. Include AppData if application data is needed; Ctrl+H shows hidden items. - Eject the destination after the copy completes. On another working computer, open the wanted documents and full-size photos before changing the original Windows installation.
The lsblk manual explains the device listing. In the NTFS-3G manual, ro selects read-only access and norecover refuses an unclean volume instead of attempting its normal recovery behavior. If the mount fails, leave the source unchanged and use an image-based recovery approach. Removing the hibernation file or forcing a write mount changes the source.
Cloud-only files also need attention: an online placeholder is not the full document, so check the cloud account from the working computer for those files.
Someone familiar with drive diagnostics can read SMART information with sudo smartctl -a /dev/nvme0n1, substituting the actual device. This requires smartmontools. Its manual describes the health information returned for NVMe and other drives. Stop using a drive that reports a failing health status. Interpret the reported warnings and error types rather than treating every nonzero counter as a failed SSD; the command reads information and does not repair the boot error.
Reading a removable SSD on another computer
A compatible USB enclosure can make a removable drive accessible from a working computer without booting its Windows installation. Match the adapter to the interface: an M.2 NVMe drive, an M.2 SATA drive and a 2.5-inch SATA drive need appropriate connections. M.2 describes the form factor, so its shape is not enough to choose an enclosure.
Shut the computer down fully and follow the manufacturer's service manual for removal, including battery disconnection. Screw locations, brackets and SSD lengths differ. A soldered storage device does not come out using the same procedure, and a RAID or multi-drive configuration needs its original arrangement preserved.
Cancel any format prompt. For BitLocker use the unlock steps above. If the volume still cannot be opened, preserve an image for recovery.
MDrepairs handles SSD recovery when the drive needs more than a working Windows installation. Hardware work depends on retaining a usable reading and encryption path through the original device. Raw flash contents still need the controller's data organization and any required keys.
| Recovery work | Price | What the work depends on |
|---|---|---|
| Logical recovery from a healthy drive with a damaged file system | $1,000 to $1,500 | Readable sectors and recoverable file-system information |
| BitLocker-encrypted drive with the key supplied | $1,000 to $1,500 | A valid key and sufficient readable encrypted data |
| Original-board or supported controller recovery | $1,500 to $2,000+ | A usable original reading and encryption path |
| NAND flash failure with the controller alive | $1,000 to $2,000+ | The portions of memory that can still be read |
A $100 diagnostic precedes the recovery estimate; that fee is credited toward a successful recovery, and work starts after your approval.
Fix Windows after the files are copied
If the drive disappears, leave it off and skip Windows repairs. With stable storage and the saved files checked, choose the repair that matches what changed. After a Windows update, Microsoft's recovery guidance points to Troubleshoot > Advanced options > Uninstall updates in Windows Recovery Environment. Before changing BIOS or storage firmware, preserve your data. A storage-mode change calls for the computer maker's configuration instructions rather than trying AHCI and RAID settings at random.
Startup Repair addresses startup problems such as damaged system files or boot configuration. The path is Troubleshoot > Advanced options > Startup Repair.
On backed-up, stable storage, bootrec /fixmbr rewrites legacy MBR boot code. A typical Windows 11 PC starts through UEFI and its EFI system partition. bootrec /rebuildbcd looks for installations to add to the boot configuration. For missing UEFI boot files, follow Microsoft's BCDBoot procedure after identifying the Windows and system volumes.
Microsoft's Reset this PC documentation distinguishes two choices: Keep my files reinstalls Windows while retaining personal files and removing apps and settings; Remove everything removes personal files too. Cloud download selects where the Windows installation files come from. It does not, on its own, choose whether personal files are kept.
If a reset has already finished, check which option ran and whether your files remain. For files removed during a reinstall, the writes from the new installation and any SSD deletion processing affect what survives. Stop using the disk if files are missing after the reset.
Get help with data recovery
Bring your device to our Lincroft lab during opening hours, or mail it in.
How to mail your deviceThe $100 diagnostic is non-refundable once diagnostics start, and donor drives or replacement parts you approve are non-refundable once ordered, even if recovery fails.
Published by MDrepairs
MDrepairs is a data recovery and electronics repair lab in Lincroft, New Jersey. Our founder and lead technician Joseph Montanti films real cases for our YouTube channel, showing tools, repair steps and recovery outcomes.
Keep reading
- Chromebook Dead? Where Your Files Actually Live
- Linux Drive in a Windows PC? Reading ext4 Safely
- Laptop Screen Broken? How to Get Your Files