Inside the lab follow MDrepairs on YouTube, TikTok & Instagram - visit our YouTube channel ↗

Data Recovery Guide

How to Recover Files After a Failed Windows Update

Updated November 18, 2026
In this article

Failed Windows updates can leave files inaccessible. This guide covers checks you can make before contacting a data recovery lab.

The good news: in most failed update scenarios, your data is still on the drive. Windows updates don't typically delete personal files. But they can make those files inaccessible, hide them in unexpected places, or leave the system in a state where you can't reach them without knowing where to look. And in the worst cases, a failed update can corrupt the file system badly enough that recovery software or a professional lab is your only option.

This guide covers every scenario. Whether your PC still boots (but files are missing), your PC won't boot at all, or the update corrupted your drive, we'll walk through exactly how to get your files back.

Why Windows Updates Fail (And What Happens to Your Data)

Understanding why your update failed helps you figure out where your data went and how to get it back. Here are the most common failure modes:

Power Loss During Update

This is the worst-case scenario. Windows is actively writing to the disk, modifying system files, updating the registry, and reorganizing partitions. If power cuts during this process, you've got a half-finished update with a partially modified file system. The boot configuration might be pointing to files that don't exist yet. System files might be half-written. Your personal data is almost certainly still there on the disk, but the road to get to it just got complicated.

Insufficient Disk Space

Major feature updates (like going from Windows 10 to 11, or the annual feature updates) need significant free space. If the drive runs out of space mid-update, Windows tries to roll back. Sometimes the rollback works. Sometimes it fails too, leaving you with a half-updated, half-rolled-back system. Your data is usually intact in this scenario, just stuck behind a broken installation.

Driver Incompatibility

The update installs fine, but a driver conflict causes blue screens or boot failures. Windows tries to apply the update, restarts, crashes, tries again, and eventually gives up. Your data is fine in these cases. The problem is purely with the OS, not the disk. But the repeated crash cycles can cause secondary file system corruption.

Corrupted Update Files

The update package itself was damaged during download. Windows tries to apply a corrupted update, fails midway, and may corrupt system files in the process. Again, your personal data is usually intact, but system-level corruption can make it inaccessible.

Failure Type Data Risk Your Data Is Probably...
Power loss during update High On the disk but potentially behind a corrupted file system
Out of disk space Low Intact, just stuck behind a broken installation
Driver conflict Low to Medium Intact, but boot loops can cause secondary corruption
Corrupted update package Low to Medium Intact, system files may be damaged
Feature update moved files None In the Windows.old folder, perfectly safe
Update + existing drive problems High At risk, the update may have worsened a failing drive

PC Still Boots but Files Are Missing

If your PC boots after a failed (or successful) update but your files seem to be gone, don't panic. They're almost certainly still on the drive. Here's where to look:

Check Windows.old

Major Windows updates create a Windows.old folder on your C: drive that contains your entire previous installation, including all your personal files. Navigate to C:Windows.oldUsersYourUsername and you'll find your Desktop, Documents, Downloads, Pictures, and everything else right where you left it.

Time-sensitive: Windows automatically deletes the Windows.old folder after 10 days (sometimes 28 days on feature updates). If you find your files there, copy them to their proper location immediately. Don't wait. Once Windows cleans up that folder, recovering those files becomes much harder.

Check for a Temporary User Profile

Sometimes after a failed update, Windows creates a temporary user profile instead of loading yours. You'll know this happened if your desktop is blank, your settings are gone, and nothing looks familiar. Your actual profile is still on the drive; Windows just isn't loading it.

How to Fix a Temporary Profile

  1. Open File Explorer and navigate to C:Users
  2. Look for your original username folder. It should still be there alongside a folder like "TEMP" or your name with ".000" appended.
  3. Open Registry Editor (Win+R, type "regedit")
  4. Navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList
  5. Look for entries with ".bak" appended. These are your real profile entries that got displaced.
  6. Remove the ".bak" from the correct entry and restart.

If this feels too technical, just navigate to your real user folder in File Explorer and manually copy your files to the current profile or an external drive.

Check Different Drives

What was D: is now E:. Your files are right there, just on a different letter. Open File Explorer and check all drive letters.

Check Hidden Files and Folders

Updates sometimes reset folder viewing preferences. Open File Explorer, go to View, and make sure "Hidden items" is checked. Your files might just be hidden, not gone.

Search for Specific Files

Use Windows Search (Win+S) or the search bar in File Explorer to search for specific file names you know should exist. If the file system is intact, Search will find them wherever they ended up.

PC Won't Boot After Update

If the failed update left your PC unable to boot, your data is almost certainly still on the drive. You just need to get to it without relying on the broken Windows installation. Here are your options, from easiest to most involved:

1 Try Safe Mode

Force-shutdown your PC three times during boot to trigger the Windows Recovery Environment. From there, go to Troubleshoot > Advanced Options > Startup Settings > Restart > Safe Mode with Networking. If Safe Mode works, you can back up your files and then deal with the update problem separately.

2 Boot from Windows Installation USB

Create a Windows installation USB on another computer. Boot from it on the problem PC. At the installer screen, press Shift+F10 to open Command Prompt. From there, you can navigate your drive and copy files to an external drive using the xcopy or robocopy commands.

3 Boot from a Linux Live USB

Download Ubuntu or Linux Mint and create a bootable USB on another computer. Boot from it and you'll have full access to your Windows drive without the broken Windows installation getting in the way. Linux doesn't care that Windows is broken. It just reads the file system and lets you copy everything to an external drive.

4 Remove the Drive and Connect to Another PC

If none of the boot options work, physically remove the drive from the problem PC and connect it to a working computer. Use a USB-to-SATA adapter ($10-$15 on Amazon) or install it as a secondary internal drive. Once connected, you should be able to browse the drive and copy your files normally.

Important: If the drive makes clicking, grinding, or beeping sounds when connected, stop immediately. That's mechanical failure, not an update problem. The update may have been the last straw for a drive that was already failing. In that case, you need professional data recovery.

Finding Your Files in Windows.old

The Windows.old folder deserves its own section because it's involved in so many "missing files" cases after updates. Here's everything you need to know about it.

What Windows.old Contains

When Windows performs a major update, it moves your entire previous installation into a folder called Windows.old on the C: drive. This includes:

  • Your entire Users folder (Desktop, Documents, Downloads, Pictures, Music, Videos, AppData)
  • Program Files and Program Files (x86) (installed applications)
  • The old Windows directory (system files from the previous installation)
  • ProgramData (application data, configurations)

Your personal files are at: C:Windows.oldUsersYourUsername

How to Access Windows.old When Permissions Block You

Sometimes Windows won't let you access certain folders within Windows.old due to permissions. Here's how to fix that:

Taking Ownership of Windows.old Folders

  1. Right-click the folder you can't access and select Properties
  2. Go to the Security tab and click Advanced
  3. Next to "Owner," click Change
  4. Type your username and click Check Names, then OK
  5. Check "Replace owner on subcontainers and objects"
  6. Click Apply and OK

Alternatively, open an elevated Command Prompt and run: takeown /f "C:Windows.oldUsersYourName" /r /d y

The 10-Day Timer

Windows automatically schedules Windows.old for deletion. For regular cumulative updates, it's usually 10 days. For feature updates, it can be up to 28 days. After that, Windows runs a cleanup task that removes the folder.

If you're within the window, copy your files now. If you're past the deadline and the folder is gone, the files may still be recoverable from the raw disk, but you'll need recovery software or a professional lab.

Rolling Back a Bad Update

If the update broke things and your files are still intact, rolling back to the previous version might be the cleanest fix. Here's how:

Rolling Back a Cumulative Update

Method 1: Through Settings (if PC boots)

  1. Open Settings > Windows Update > Update History
  2. Click Uninstall updates
  3. Find the problematic update (sort by date to find the most recent)
  4. Click Uninstall and restart

Method 2: Through Recovery Environment (if PC won't boot)

  1. Boot into Windows Recovery Environment (force-shutdown three times during boot)
  2. Go to Troubleshoot > Advanced Options > Uninstall Updates
  3. Choose "Uninstall latest quality update" or "Uninstall latest feature update"
  4. Follow the prompts and restart

Rolling Back a Feature Update

Feature updates (the big annual ones) can be rolled back within 10 days:

  1. Open Settings > System > Recovery
  2. Under "Go back," click Go back
  3. Follow the wizard. Windows will restore your previous version from Windows.old.

This only works if the Windows.old folder still exists and hasn't been cleaned up. If you ran Disk Cleanup and deleted "Previous Windows installation(s)," you can't roll back.

Before rolling back: Make sure your data is backed up to an external drive first. Rollbacks usually preserve your files, but "usually" isn't a guarantee. Copy your important files somewhere safe before attempting any system-level changes.

Using Recovery Tools When Standard Methods Fail

If you can't boot, can't access Windows.old, and connecting the drive to another PC shows corruption, it's time for recovery software. Here's what actually works:

Best Recovery Tools for Update-Related Data Loss

Tool Best For Cost
R-Studio Complex file system recovery, RAID, multiple partitions $80 (worth every penny)
DMDE Partition recovery, reconstructing damaged MBR/GPT $20 (free version recovers 4000 files)
UFS Explorer Professional-grade recovery from corrupted file systems $60-$130
TestDisk (free) Partition table repair, boot sector recovery Free
PhotoRec (free) Raw file carving (recovers files by type, loses names) Free
Critical rule: NEVER install recovery software on the same drive you're trying to recover from. Always run it from a USB drive or a different computer with the problem drive connected as a secondary drive. Installing software on the problem drive can overwrite the very data you're trying to recover.

Step-by-Step Recovery Process

1 Connect the Drive to a Working Computer

Remove the drive from the problem PC and connect it to another computer as a secondary drive. Use a USB-to-SATA adapter or install it internally.

2 Clone the Drive First (If Possible)

Before running recovery software, clone the drive to another drive using ddrescue (Linux) or HDDSuperClone. This protects the original data. Run recovery tools on the clone, not the original.

3 Scan with Recovery Software

Run a full scan with R-Studio or your chosen tool. It'll analyze the file system and present a list of recoverable files. Most tools let you preview files before recovering them, so you can verify they're intact.

4 Recover to a Different Drive

Save recovered files to a completely separate drive. Never recover files back to the same drive you're recovering from.

When You Need Professional Data Recovery

Software recovery works great when the file system is damaged but the underlying storage media is healthy. There are scenarios after a failed update where professional recovery is your best bet:

  • The drive was already failing before the update. The update pushed it over the edge. Now you've got file system corruption on top of physical drive problems. Recovery software can't handle bad sectors and mechanical issues.
  • Severe file system corruption. If the update interrupted a major file system operation (like a partition resize), the corruption may be too complex for consumer recovery tools.
  • SSD with TRIM activity. If the failed update triggered TRIM operations on your SSD, affected data blocks are physically erased. Only a lab with specialized NAND-level tools has any chance.
  • Recovery software finds files but they're corrupted. If files scan as recoverable but open as corrupted, the data fragments may need manual reassembly that recovery software can't handle.
  • You only get one shot. If the data is critically important (business records, legal documents, irreplaceable photos), don't experiment. A professional lab maximizes recovery chances on the first attempt.

At MDrepairs, we do an evaluation. You approve the estimate before recovery work starts.

Notorious Windows Updates That Caused Data Loss

Windows updates have a long history of occasionally going sideways. Here are some of the most notable ones that caused actual data loss:

Windows 10 October 2018 Update (1809)

This one was bad enough that Microsoft pulled it entirely. The update deleted files from users' Documents, Pictures, and Music folders without any warning. The root cause was a conflict with OneDrive's Known Folder Redirection feature. Microsoft eventually reissued the update with a fix, but for people who'd already lost files, the damage was done. This was a case where professional data recovery was the only option for many users, since the files were genuinely deleted from the disk. If you've done a full reset, see our guide on recovering data after a factory reset.

Windows 10 May 2020 Update (2004)

This update caused widespread issues with storage drivers, leading to failed boots and occasional data corruption. It also had a bug that would reset user preferences and occasionally move files to Windows.old in unexpected ways. Most data was recoverable from the Windows.old folder or through rollback.

Various Cumulative Updates (Ongoing)

Microsoft's monthly cumulative updates occasionally cause boot failures, blue screens, and driver conflicts. These typically don't delete data directly, but the resulting boot loops and forced repairs can lead to secondary data loss.

Pattern to notice: The most dangerous updates are the big feature updates (released once or twice a year), not the monthly security patches. Feature updates essentially reinstall Windows and have far more potential to go wrong. If you value your data, back up before every feature update.

How to Prevent Update-Related Data Loss

You can't stop Windows from updating (well, you can defer updates temporarily), but you can protect yourself from update-related data loss:

Before Any Major Update

  • Back up everything to an external drive. Not a cloud sync service. An actual backup to a drive you can disconnect. If the update goes wrong, you want a copy that Windows can't touch.
  • Create a system image. Windows' built-in tool (Settings > System > Storage > Advanced storage settings > System image backup) creates a complete snapshot of your system. If anything goes wrong, you can restore the entire thing.
  • Check your disk health. Run CrystalDiskInfo and check SMART status. If your drive is already showing signs of failure, an update's write-intensive process could be the final straw. Replace the drive first.
  • Make sure you have enough free space. Feature updates need 20-30GB of free space. If you're tight on space, clean up before updating.
  • Use a UPS. Power loss during updates is one of the worst scenarios. A UPS costs $50-$100 and prevents it entirely.

Update Strategy

  • Defer feature updates by 30 days. Let other people be the guinea pigs. Settings > Windows Update > Advanced Options > Pause updates or set a feature update deferral period.
  • Don't force-restart during updates. If Windows says "Working on updates, don't turn off your computer," listen to it. Interrupting an update mid-write is how file systems get corrupted.
  • Keep your drivers updated independently. Many update failures are caused by outdated drivers conflicting with new Windows versions. Update your GPU, storage, and chipset drivers before applying Windows updates.

Ongoing Protection

  • Enable File History. Windows File History continuously backs up your personal files to an external drive. If an update moves or deletes something, you've got versions going back weeks or months.
  • Use a proper backup solution. Veeam Agent for Windows (free), Macrium Reflect, or Acronis. Set up automated daily backups to an external drive or NAS.
  • Set a System Restore point before updates. While this doesn't protect personal files, it lets you roll back system changes quickly.

See Our Recovery Process

Here's a look at how we handle data recovery from drives that won't boot. Whether it's a failed update, corrupted file system, or mechanical failure, this is what the process looks like.

Frequently Asked Questions

Does a failed Windows update delete personal files?

In most cases, no. Failed updates typically don't touch personal files like documents, photos, and videos. Your files are usually still on the drive, just inaccessible because the OS is broken. The exceptions are rare but do happen (like the Windows 10 October 2018 Update disaster). In almost all cases, your files are recoverable.

Where did my files go after a Windows update?

Check C:Windows.oldUsersYourUsername first. Feature updates move your previous installation there. Also check C:Users for a temporary profile folder. If neither location has your files, boot from a USB drive and browse the drive from outside Windows.

Can I undo a Windows update?

Yes. For cumulative updates, go to Settings > Windows Update > Update History > Uninstall Updates. For feature updates, go to Settings > System > Recovery > Go Back (available for 10 days). If your PC won't boot, access these options through the Windows Recovery Environment.

My PC is stuck in a boot loop after an update. Is my data safe?

Your data is probably still intact, but each boot loop cycle runs repair operations that write to the disk. Break the loop as soon as possible by force-shutting down during the manufacturer's logo screen, then boot from a USB drive to access your files. The longer the loop runs, the more risk there is to your data.

Should I run Startup Repair after a failed update?

Startup Repair is a reasonable first step if your drive is healthy and the problem is purely software. But if your drive was already showing signs of failure, or if Startup Repair fails once, don't run it again. Each attempt writes to the disk and can make recovery harder. Back up your data through alternative methods first. We have a full guide on Startup Repair if you want the details.

How long does Windows keep the Windows.old folder?

Usually 10 days for standard updates and up to 28 days for feature updates. After that, Windows runs a scheduled cleanup task that deletes it. If you find files there, copy them immediately. Don't assume you have time.

Can a data recovery lab help after a failed Windows update?

Yes. Whether the update corrupted your file system, triggered a boot loop that damaged the drive, or caused actual file deletion, we can usually recover the data. The $100 diagnostic is credited toward a successful recovery and is non-refundable once diagnostics start. Approved donor drives or replacement parts are non-refundable once ordered, even if recovery fails. You approve the estimate before recovery work starts. Get an evaluation.

Lost your data?
Let's assess your options.

Estimated turnaround: 4–6 weeks; timing may vary by case. Start with a free initial quote. The $100 lab diagnostic is credited on success; diagnostic and approved parts charges apply on failure.

Split the cost of your recovery with Affirm. Explore financing Subject to eligibility.

Devices recovered at our lab

These rows come from BenchKey, the ticket system we built for our own shop. Customer names, contact details and descriptions are left out.

Gloved hand holding a hard drive head stack at our Lincroft lab
A gloved hand holds a hard drive head stack at our Lincroft lab.
4.6 · 345 Google reviews$100 diagnostic, credited toward a successful recovery
Start your mail-in recovery