Ocean-damaged iPhone needed USB and display repairs to recover pictures
- Device
- iPhone
- What happened
- Dropped in the ocean and would not power on
- What was wrong
- Burnt board material, a corroded USB controller and damaged display circuitry
- Result
- Recovered. Pictures were saved after short removal, USB-controller replacement and work on the display circuitry.
An iPhone had been dropped in the ocean and showed no signs of life. The customer wanted the pictures recovered. Joe used a thermal camera to locate a hot capacitor. It had heated up enough to burn a hole through the motherboard. The burnt material was making electrical connections that should not have been there.
Joe carefully removed the burnt board material, clearing the short. He then found corrosion under the USB controller, the chip that handled the USB connection. He cleaned that area and replaced the controller. When he tried powering the phone on, the screen's backlight came on, but there was no image.
The display circuitry still needed work. Joe used a donor board for replacement parts, including backlight drivers, which powered the screen's light, along with coils, capacitors and resistors. The job took three hours. After the display work, he powered the iPhone on again and saved the customer's pictures.
If yours is similar
Keep an ocean-soaked iPhone disconnected from power. The diagnostic can check both the USB and display circuitry to find what still blocks picture access.
iPhone Data RecoveryThe people we help
