Phone that died overnight stayed inaccessible after a board transfer
- Device
- Phone
- What happened
- Stopped responding overnight while on a nightstand
- What was wrong
- Joe concluded the processor had failed after other replacements did not restore startup
- Result
- Not recovered. The phone never powered on, and none of the customer's photos could be recovered.
A customer left his phone on a nightstand and found it unresponsive the next morning. It held pictures of his daughter and father. Another company had already worked on it. Joe removed the motherboard and saw damage around a protective shield, along with a solder ball beside the phone's processor. Joe suspected that the processor had been overheated.
The board drew current immediately when connected to a power supply, indicating a short. With no schematic available, Joe used a thermal camera to locate a hot chip connected to the battery. Removing it cleared that short, and he fitted a replacement. A second short remained. Injecting power at several points produced no useful heat indication, and removing chips associated with wireless and cellular functions did not clear it.
Joe next removed a power management chip connected to the processor. That cleared the remaining short. He replaced the chip, but the phone still did not start. He then transferred the customer's processor, RAM, storage and another original chip to a donor motherboard. Joe cleaned the chips and renewed their solder joints before installing them on the prepared board.
The transferred chips did not restore startup. The phone's current draw stopped at 300 mA and it stayed off. Joe tried replacement RAM as a final check, with the same result. He had also tested the storage and found it healthy. The motherboard and RAM had been substituted, leaving the processor as the unresolved part.
Joe concluded that the processor was dead. He suspected that the shorted power management chip had damaged it. Without a working original processor, he could not recover the data from this phone. The customer's photos remained inaccessible after the chip and board work.
If yours is similar
After replacement power chips failed to restore startup, Joe concluded that this phone's processor was dead. For a phone that dies overnight, leave further startup attempts to the lab: the diagnostic checks the power fault and the original parts needed to reach the data.
Cell Phone Data RecoveryThe people we help
