Wet iPhone's screen stayed blank during picture and video recovery
- Device
- iPhone
- What happened
- Got wet and showed no signs of life
- What was wrong
- Shorted capacitor and suspect power chip with a loose solder ball
- Result
- Recovered. Pictures and videos were recovered; the screen still showed no image.
A customer's iPhone had got wet and showed no signs of life. Three other data recovery centers had already tried without success. The owner needed the pictures and videos on it.
Joe opened the phone and found a loose solder ball beside a power chip. He also found a shorted line. He cooled the board and applied one volt to that line, revealing a capacitor that heated up. He removed the capacitor and tested again; the phone then drew half an amp, an improvement but not enough to get it running.
Joe returned to the power chip because of the solder ball coming out beside it. He replaced the chip, and the phone started turning on. The screen still showed no image. He left the display fault and moved on to extracting the data.
He put the phone into recovery mode and extracted its file system to reach the user data. He then went through those files and found the customer's pictures and videos.
If yours is similar
Stop repeatedly powering up a wet iPhone whose screen stays black. A diagnostic can determine whether the board can run well enough to extract files even if the display remains blank.
iPhone Data RecoveryThe people we help
