WD drive music recovered after its circuit board snapped
- Device
- Western Digital WD40NDZM hard drive
- What happened
- Owner reported the board snapped during removal from its casing
- What was wrong
- Broken board; original processor and ROM were needed to access encrypted data
- Result
- Recovered. All of the customer's data, including the music stored on the drive, was saved.
A customer mailed in a hard drive holding all of his music. He reported that another company had snapped its circuit board while removing it from the casing. Joe explained that this drive's data was encrypted through its original processor, so fitting a replacement board alone would not provide access.
Joe removed that processor from the broken board and cleaned off its old solder. He formed fresh solder balls and fitted it to a replacement board. He also transferred the original ROM, which held the board's firmware. To work with the drive, he changed the USB-C connection to SATA by soldering power, ground and four data lines.
With the original electronics on the replacement board, Joe powered the drive and checked its sectors. The contents were now readable through that setup. He opened Data Extractor and could see the files. Joe imaged the drive and saved all of the customer's data, including the music that had been inaccessible.
If yours is similar
This drive needed its original processor and ROM on the replacement board, so leave those electronics intact instead of trying more boards. Their condition is part of the diagnostic that determines what is needed to reach your encrypted files.
Western Digital Data RecoveryThe people we help
