Dropped hard drive photos remained inaccessible after head replacement
- Device
- Hard drive
- What happened
- Dropped, then clicked when plugged back in
- What was wrong
- Scratched platter and damaged service-area files prevented access
- Result
- Not recovered. The drive's start-up files could not be repaired, so the customer's photos remained inaccessible.
A customer dropped a hard drive containing the pictures he had taken throughout his life. When he plugged it back in, it clicked and he could no longer reach those photos. Another company had already attempted recovery. Joe opened the drive in a dust-free enclosure and removed the read heads, the parts that read files from the platter surfaces. Under a microscope, one head looked visibly damaged beside an undamaged head.
Joe removed the platters one at a time, inspected and cleaned them, and returned them to the casing. He found a scrape at the edge of one platter where the heads had crashed. He explained that replacement heads would hit that scratch and fail. For this attempt, he substituted an undamaged donor platter for the scratched one so the drive could start without that contact. He then installed replacement heads and closed the drive.
Connected to PC-3000, the recovery system, the drive spun up but reported zero megabytes. Joe loaded a start-up program into its working memory to reach the service area, the drive's own start-up files. Both copies of that area showed extensive damage. These files were stored on opposite sides of the bottom platter.
One essential file, module 31, was damaged in both copies. Joe managed to read the two damaged versions and combine them into a healthy file. Writing that repaired file back to the drive did not work: the drive malfunctioned during the attempt. Other essential files presented the same problem.
The platter damage affected the places where those start-up files had to be stored. Joe could not repair the service area, and without it he could not make the customer's files accessible.
If yours is similar
This drive was plugged back in after the drop and clicked. If yours does that, leave it unplugged: the diagnostic is where you learn whether the damage reaches the start-up files, as it did here.
Scratched Platter Hard Drive Data RecoveryThe people we help
