Over 200 dog photos saved from an undetected SD card
- Device
- SD card
- What happened
- Stopped working and no longer appeared on the computer
- Result
- Recovered. More than 200 pictures were recovered after the raw storage data was reconstructed.
An SD card stopped working with a customer's pictures of their dog on it. Plugged into the computer, it did not appear at all. Joe began by exposing the connections beneath the protective coating on the back. He drew a square in CAD software to define the area for a laser, lined the card up with its guide light and removed the coating over the copper traces.
The exposed circular contacts were data connections. A known schematic for this card identified their functions, so Joe did not need to work out the wiring from scratch. He added solder to the pads and connected wires to an adapter according to that diagram. This gave the recovery equipment access to the NAND storage, where the pictures were held, without going through the card's controller.
Joe connected the wired card to PC-3000 Flash and copied the raw contents of the storage. That copy was not yet a set of usable photos. The controller had arranged the stored data, and Joe had to reconstruct that arrangement. He corrected errors, worked through the scrambling and rebuilt the data structure to match the way the controller had stored it.
Pictures began to appear, but they were still corrupt at that stage. Joe made a further reconstruction adjustment before scanning the resulting data. The scan recovered more than 200 pictures.
If yours is similar
Reading this card produced corrupt pictures until Joe adjusted the reconstruction. More reader swaps will not answer whether your undetected card's data can be rebuilt; set it aside for the diagnostic.
SD Card Data RecoveryThe people we help
