Pictures saved from a pool-damaged phone with broken connections
- Device
- Phone
- What happened
- Stopped showing signs of life after falling in a pool
- What was wrong
- Corrosion loosened the battery connector and damaged a board connection
- Result
- Recovered. The customer's pictures were saved after connection repairs and further board cleaning.
A customer's phone stopped showing signs of life after falling into a pool. Joe took out the motherboard and found that corrosion had left the battery connector loose. He ran a jumper wire to restore that connection and covered the repair with UV mask to protect it. He also repaired a broken trace, another connection on the board.
The phone still did not turn on when Joe tested it. He went back to the board and removed a plate, exposing more corrosion underneath. He cleaned the board again and checked for shorts, but did not see any. After that additional cleaning, he plugged the phone back in for another test. This time, he was able to save the owner's pictures.
If yours is similar
This phone needed more corrosion cleaning even after its broken connections were repaired, so leave a pool-damaged phone off if the first repair has not revived it. A diagnostic can check beneath the board's covers as well as the visible connections.
Cell Phone Data RecoveryThe people we help
