Inside the lab follow MDrepairs on YouTube, TikTok & Instagram - visit our YouTube channel ↗

Replacing a missing resistor let a dead phone's pictures be saved

Device
Phone
What happened
Would not power on; held pictures of a first child
What was wrong
A shorted capacitor and a resistor missing from earlier work
Result
Recovered. The pictures were saved after a faulty capacitor was removed and a missing resistor was replaced.

A customer mailed in a phone that would not turn on, with pictures of their first child stored on it. Joe removed the main circuit board and saw suspect capacitors beside a shorted line. Moving two components aside did not clear the short.

He suspected corrosion beneath a chip and injected 1 volt into the line to see whether that chip would heat up. It did not. The fault turned out to be a capacitor on the other side of the board. Joe removed it, and the short disappeared.

There was another problem before he could finish: whoever had worked on the phone previously had knocked off a resistor, a component that limits current. Joe fitted a replacement resistor and powered the phone on. The pictures were saved.

If yours is similar

Stop having parts swapped on a phone that is still shorted after earlier work. The diagnostic can check for a remaining short and missing components before determining whether the pictures are accessible.

Cell Phone Data Recovery

The people we help

Our customers include people from

Devices recovered at our lab

These rows come from BenchKey, the ticket system we built for our own shop. Customer names, contact details and descriptions are left out.

Phone logic board with three removed chips at our Lincroft lab
A phone logic board sits behind three removed chips, solder pads up, at our Lincroft lab.
4.6 · 345+ Google reviews$100 diagnostic, credited toward a successful recovery
Start your mail-in recovery