Phone photos recovered after a power management chip replacement
- Device
- Phone
- What happened
- Shut off while the customer browsed social media
- What was wrong
- A failed power management chip caused a short
- Result
- Recovered. The customer's photos of her children were saved after the power management chip was replaced.
A customer's phone shut off while she was browsing social media. It showed no signs of life when plugged in, and she had no backups of the pictures of her children stored on it. Another company had opened the phone and separated the two parts of its motherboard. Joe inspected them and did not see other work that explained the failure.
He connected the motherboard directly to a DC power supply, which let him watch its electrical draw. Current rose immediately, indicating a short. A thermal camera showed the power management chip heating up. Joe suspected either the power chip or a component it supplied. He removed the metal shields covering other components and repeated the thermal inspection. Nothing underneath them heated up.
Joe then worked on replacing the power management chip. Glue surrounded it, so he carefully scraped the edges with a blade before applying heat and lifting it off. He cleaned the remaining glue and mixed low-melt solder into the old solder to make it easier to remove. Solder braid, which drew the melted solder off the board, helped clear the mounting area.
After checking the replacement chip's solder joints, Joe applied flux to help the solder flow and heated the chip into place. The main power rail, the board's main electrical supply line, now gave a normal reading. He connected a replacement screen, battery and charging port for the test. A connecting tool joined the motherboard halves without soldering them together. When he plugged the phone in, it worked well enough to save the customer's photos.
If yours is similar
The hot power chip was only the first clue here: Joe's diagnostic also checked the components beneath the shields. With a phone that shuts off and stays unresponsive, leave the charger disconnected until testing narrows down the fault.
Cell Phone Data RecoveryThe people we help
